Rudder tips

For best performance, we recommend the following:

Ideally, your rudder cables should exit the stern of your kayak 1-2″ below the bottom of the base plate of the mount, and at least 5 ” apart.
If your rudder cables exit the stern of your kayak below this level, they should be at least 4″ from the midline to avoid any interference with the mount.
If the spread of the exit points for the cables is less than 6″, raise the base plate above the stern platform at least 3/4″, to allow the motor cable to pass between the cables and under the plate.
Bungee the rudder pedals to reduce slack in the cable.
We recommend use of 1/16″ stainless steel rudder cables…and we prefer sliding-track pedals, like model K747600 from Sealect Designs.